Search results

My hold down is for a Mack. Cut down threaded rod also.

Just did the battery relocation. I need some grommets for the back of the box, so the edge doesn't wear through the cables. Took about 5 hours. Pulling the seat and bench tomorrow.

Today i turned down the idle on my injection pump. So, easy! Do this with the engine off. Remove the brass hex head bolt under the fuel line connection. Mine had a safety wire through it. Reach inside with a regular screwdriver and screw in or out. I turned mine a couple of turns...

Nice pics! Found a puddle under my 5ton this morning. Traced it back to the top heater petcock. Closed both petcocks, but still dripping a little. Added 1.5 gallons of coolant to the expansion tank. Is the coolant system supposed to be pressured when cold? I think I will use your tips and...

Did you also change the seals? Is it possible to only need to change the boot? I don't see gear oil, only grease around the broken boot. I guess I will know more once I see the inside of the drum.

While replacing my steering wheel today, I notice my front drivers side axle is a greasy mess. Looks like that's next on my list. Thanks for the info MO MV man!

Like It! bigboy44. Oh, this isn't Facebook.

Sometimes my M923 starts right up, sometimes it don't. I plug it in to a 24v jumper and it fires. I guess one or more of the original batteries are toast. I think I'm gonna do the two batteries in the side box trick. Have the batteries. Also have several adjustable hummer buckets and a 12v...

In my profile under albums. It's not that clean now!

I have been making and mixing fuels for many years. Run it in a variety of truck types. See the pics of my latest generation refinery. Your truck will burn anything that makes a BTU. However, some caution should be taken. WVO should be cleaned and free of animal fats. My final filter is 5...

I'll buy MV tags as long as I'm only restricted from commercial use. Please keep us in NC informed!

Certainly it wouldn't cost more than a weighted tag. Just paid over $400.00 for my 5 ton.

Great Idea! I need a taller boarding ladder too! I will make it out of aluminum. My spool gun works, OK. (Miller) I just bought two push pull machines just for aluminum!

M923: Media blasted and powdercoated 6 two pcs. wheels flat black. Powdercoated all the wheel nuts and lug nuts olive drab. Remounted 6 new 395/85 R20 tires. Installed the antenna and tied it down. Installed a single pin nato end on my 24volt charger. Charged the batteries with it...

Mine, on occasion do the same thing. I just bump it in reverse and it releases. It is probably from sitting in formation for years.

I'm just overly excited to have a MV that is road trip worthy!

Right, I will be patient and wait for the socket. Then use my Big Daddy Impact! It sucks seeing the new singles lined up ready to go. Got the fronts on. The truck has a California stance, high in the front. I'm just overly excited to have such a nice roadtrip worth MV!

Funny!

I would like to attend! 4 to 5 hour trip for me,from Charlotte NC.

I would like to attend this show! When?