• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    MEp-018a new electrical starting issues...

    Ok, So I wrote on here a few weeks ago because of a starter solenoid issue which I am pretty sure I have fixed. Now I have a new issue, when I connect the batteries and flip the starter switch I get nothing but click not from the starter but from the switch/control panel. I think this is at...
  2. S

    MEP-018a magneto problems...

    speaking of timing light where do you get 1 for these things I have a automotive 1 which I'm assuming won't work since it's 12 volt am I correct
  3. S

    MEP-018a magneto problems...

    okay so here's an update... I tried testing different areas for continuity against the casing ground and found that the red wire that comes from the coill is grounded but the continuity never changes for the points whether open or closed...this didn't seem right. I tested the actual coil...
  4. S

    MEP-018a magneto problems...

    it does snap when I turn it, just no spark...not quite sure how I can test it other than what I have done ( hooked a spark plug up to it and twist!)
  5. S

    MEP-018a magneto problems...

    Hi guys, New to post but long time reader... So here's my story..I bought 2 MEP-018a gensets the other day; both HAVE run, meaning I was witness to both of them running. One I thought had a fuel line clog and bad fuel pump the other had a bad starter solenoid. So after cleaning out the fuel...
  6. S

    Offer on broken MEP-003a need advice...

    sorry, yes I meant would replacing it with used parts. I mean from what I have read here and on smokestak, it doesnt seem like it would be a cheap option either. Again Im looking for affordable, and I assume cheap would not be probable. I get that there is no way to tell what the issue could be...
  7. S

    Offer on broken MEP-003a need advice...

    economical to repair but what about replace especially with you use part would that be a more viable option or possibility?
  8. S

    Offer on broken MEP-003a need advice...

    Hmmm....interesting. I would consider myself very mechanically inclined. And for the appropriate price in parts I wouldn't mind getting b@lls deep into something like that. I will throw that offer out there and see what I get Ive looked on there (GL) and it looks like an auction in my area...
  9. S

    Offer on broken MEP-003a need advice...

    Hi everyone, Im new to the forum, well at least new to posting.. Ive been looking into military gensets for quite some time now. 1) cause Im prior service, and 2) cause the stuff is rock solid! Anyway trying to make a long story short. My knowledge of these generators is somewhat limited, I...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks