Search results

Thanks I'll try that

I have a M - 38 A-1 when I get it up around 40 Miles per hour the front end starts to shemmy really bad everything seems tight, tires are good please advise Thanks Borky 51 The right phone Number is 414-708-1467

Thanks guys I still had no luck finding the gasket at Napa but did take your advise on getting the heavy duty felt gasket sheet for $3.00 and will have enough to make 6 more off that one sheet. The Napa Numbers were wright for the Thermostat 358-180 and the seal 4662 You guys have a wealth of...

I'm looking for a little help trying to find the Napa part number for the thermostat gasket I found the seal/thermostat number not the gasket number. I would appreciate the number if someone would have it handy. Thanks

Were are all the grounds located for the switch

I have a problem not me my deuce, When I put the lights on everything works then when I put the turn signals on the lights go out and I have to rest the light switch. My directional don't flash I put a new flasher in When the air pressure is low the directional work when I turn them on and off...

Thanks everyone for that responded about the fuel lines a lot of good ideas, I decided to go with Hyd. hose and replace all the fittings. I found everything that I needed Good material for $40.00 this includes all the injector line. Thanks for all your help you guys are great.

I wouldn't mind staying with the plastic lines I could really use the fittings/ compression rings along with the hose. I'm having trouble finding the hose and the fittings. thanks that would be great I can be reached on my cell 262-347-8711 ask for Bob

Thanks I was hoping that was the case, I really didn't know were I could find the fittings

Can I replace the plastic fuel lines with compression fittings coming from the fuel filter hosing with a rubber fuel line? and what different type of fittings would I have to use or should I stay with the plastic lines. The line I have on the M-35 are cracked Thanks

Thanks all the TM info that really help me I'm still fumbling around the computer. Thanks again you guys are great

Where can I find the torque specs. on my M-35A-2 the bolts for the fly wheel ,pressure plate, transmission, etc. I did not have any luck finding the TM

I would be interested in the camo cover if it is for the M1102 / M1101 trailer please call me at 262- 347 - 8711 ask for Bob Thanks

Thanks guys for your help on the fuel filter.

I don't have the Tm on my M-35 A-2 What is the torque on the bolt that holds the fuel filters on ? Thanks

Can anyone tell the part Numbers for the fuel filters from Napa for my M-35-A-2 1971 the cartage type. Thanks Borky51

John Emery has Tie rods long and short his Number 1-262-567-5401

I just got off the phone with John he will call me latter with the info on the Deuce cover he was not sure of the condition Thanks

I'm glad you got a hold John he has everything that you would need for your mule.

It is best to get John on this number 1-262-567-5401 and yes he is a great guy.