• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. E

    carc paint question

    The girl at chemical coatings told me it was the difference in what service used it, not sure that's true. Type one was a two part and hazardous. Type 3 has a smoother finish when applied. I Found a lot of this info on the sm web site chemical coatings took a bit of looking but a crown and coke...
  2. E

    carc paint question

    you will need a chemical coating store ask you local Sherwin Williams store they can give you the number to the nearest one.green is f93g110,black is f93g11,and brown is f93n110 this is the type 3 mil-dtl-53039.shipping and haz they should be 160.00 a gal.two gal green and one gal of black and...
  3. E

    m925a2 no charge

    ok,to close this out in case someone does a search on here this is what I did.I took the wire from regulator that goes to alternator/generator and took volt meter pos lead and ground lead to vehicle ground with truck running and touched each pin with pos lead on meter and got no voltage so I...
  4. E

    m925a2 no charge

    Yes by the gauge I need to put a volt meter on the batteries good thought slipped my mind to day
  5. E

    m925a2 no charge

    no but that's kinda how it sounds.lol
  6. E

    m925a2 no charge

    yes having problems finding diagram for pins on the vehicle diagnostic connector. Like I say truck cranks and runs good just not charging. tag says recond-1008
  7. E

    m925a2 no charge

    Hope I do this right. I have a m925a2 I just bought got batteries charged up but no charge. The alternator is a 100 amp 10947517-1 I notice its got three wires from the harness that look like they would be used on a 60 amp plug in alternator "just threw that in, probably will cause confusion"...
Top