• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. T

    78 inch (or any) halogen IBIS Tek light bar

    has anyone updated the lights to LED lights?
  2. T

    grounding issue?

    When I try to hook up a 24/12 volt 20 amp converter to the 24 vol positive post (going to the starter) inside the battery box, I get an arc at the positive post. any ideas what is happening? thanks,
  3. T

    under dash body harness

    could anyone please photos or TM info showing the correct routing of the body harness from above the accelerator pedal routing behind the steering column. mine has to be installed incorrectly as it was chaffing on the steering column at the u joint. see photo below.... thanks in advance!
  4. T

    KDS green label PCB COOKED!!!!

    While driving home, I noticed a burning smell and the alternator gauge NOT charging. A few minutes, literally 2-3 min., as I a was pulling into the driveway, I noticed the glow plug light and park light were lit up, NOT GOOD. I parked the truck and shut it down. I had a bad feeling and about 10...
  5. T

    HMMWV and ZIP-TAPE! have YOU used it?

    Hello, I had the rear curtain window on my 4 door soft top cut out larger for better visibility during the winter because I plow snow. After 8 years, the stitching came undone and the plastic window pulled away from the curtain. the guy who did the work was too busy to fix this, so I had...
  6. T

    MEP002a insulation WORKS!!

    after using my MEP002a for 12 hours during hurrincane Irene, I decided to try an insulation project. I did no think it would work this well and am VERY happy with the results!! the genset is mounted inside my M101A2 trailer. This trailer was originally a radio trailer with 2 smaller 3kw...
  7. T

    6.5L NA Injection pump

    I have a 6.5 IP that is leaking, was rebuilt motor and appears that the underside of the IP was cracked then welded. does anyone know if the 6.2 IP or Artic kit 6.2 IP will work on a NA 6.5L motor? both are mechanical, but with the 6.5 having a bigger piston, not sure if the Arctic IP will work...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks