• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. N

    MEP003 NO FUEL

    I see that in my future I fear it may be past my skill level however and im not even sure I can find a rebuild kit.
  2. N

    MEP003 NO FUEL

    I meant that the fuel lines to the injectors were off not that the injectors themselves were out.
  3. N

    MEP003 NO FUEL

    plain fuel line
  4. N

    MEP003 NO FUEL

    fuel is making it to the injection pump.
  5. N

    MEP003 NO FUEL

    Trying to start my 003 for the first time after the auction, all fuel pumps were gone, tank has 2in of goo in the bottom, so I installed 1 pump running from a diesel can into the diesel metering fuel pump no diesel getting to the injectors or any making it out of the return the lines to the...
  6. N

    Mep002a spin on oil filter adapter

    I meant that I need a spin on adapter also.
  7. N

    Mep002a spin on oil filter adapter

    Yes that would be awsome!
  8. N

    MEP-803a : AirTex fuel pump substitution

    Any updates for curently available replacement fuel pumps?
  9. N

    MEP-002A Over Voltage issue, replaced regulator, still there

    Any update? I have this problem also.
  10. N

    Mep002a spin on oil filter adapter

    Can you please share the info on the spin on adapter.
  11. N

    MEP16B injector pump

    thanks guy! this thing has been sitting for a long time so i assume its just locked up.I have 2 of them i bought on a trailer and the other one is acting the exact same way, but im scared to dissasemble both at the same time.
  12. N

    MEP16B injector pump

    Yes I did
  13. N

    MEP16B injector pump

    tried moving the engine to no avail.
  14. N

    MEP16B injector pump

    thats the first thing I did....this thing is stuck good! maybe i did not have it in the middle of it movement , it did not try to pop out as the screws came loose so i assume the cam was at the low point. Im stumped
  15. N

    MEP16B injector pump

    I cannot get this thing off to save my life....it comes off the block about a half inch and then it is just stuck and I dont want to pull too hard and damage it. I have 2 units and both are doing the same...no fuel through the inj pump any ideas would be greatly appriciated.
  16. N

    Article: MEP WIKI

    was hoping for a suggestion...I ended up with a fuel rated well nut that did the trick
  17. N

    Article: MEP WIKI

    my fuel drain shut off fell off...just want to plug the hole somehow so i can fuel it up 803a
Top