• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. N

    Need Assistance with LMTV in Jacksonville, FL

    Email me details @ Captbrucebosarge@yahoo.com
  2. N

    Need Assistance with LMTV in Jacksonville, FL

    True about alternator but still trying to get ecm to tell injectors to inject.
  3. N

    Need Assistance with LMTV in Jacksonville, FL

    Will a missing oil pressure transducer(sender) cause the engine not to start?
  4. N

    Need Assistance with LMTV in Jacksonville, FL

    Is that circuit breaker also for the winch?
  5. N

    Need Assistance with LMTV in Jacksonville, FL

    I have tried swapping them and Installed a new cb the problem is that there is something on circuit that keeps tripping the cb. I'm just trying to figure out if the truck will start without it to determine if I need to focus my time on something else to get engine running.
  6. N

    Need Assistance with LMTV in Jacksonville, FL

    Anyone? Will truck start without PTO/FUEL SEPARATOR Circuit Breaker?????
  7. N

    Need Assistance with LMTV in Jacksonville, FL

    Can someone remove their h2o/ fuel separator and pto circuit breaker and see if their truck will start or try to start
  8. N

    Need Assistance with LMTV in Jacksonville, FL

    Byrdman1312 sounds like you're not getting enough power to starter or you have a bad starter. You measure voltage at starter or pull starter and have it tested
  9. N

    Need Assistance with LMTV in Jacksonville, FL

    So the 2000- 2003 should be the same? Because this is a 2003.5 I think????
  10. N

    Need Assistance with LMTV in Jacksonville, FL

    Will the push start button work if the CTIS system is not installed????
  11. N

    Need Assistance with LMTV in Jacksonville, FL

    Will check voltages and read codes next time I get a chance. Thanks for your help
  12. N

    Need Assistance with LMTV in Jacksonville, FL

    2003 steward stevenson Yes we have power to fuel solenoid and neutral start relay. On the circuit board the light for diff lock is on. And is there any other things that would not allow push start to work . Truck being in gear, parking brake not applied, cab position things like this. Because...
  13. N

    Need Assistance with LMTV in Jacksonville, FL

    I have 24 volts @ fuel shut off solenoid on engine. I have power to CB 45 and CB 79 and CB 49 trips when energized. CB 45 says it's for h2o and pto switch. There is also power going to k19 start inhabit relay but the light is not on, Is this good or bad?
  14. N

    Need Assistance with LMTV in Jacksonville, FL

    replaced fuse panel Replaced fuse panel and we have power to ignition switch But still have no power to push button.
  15. N

    Need Assistance with LMTV in Jacksonville, FL

    Hey, lmtv772 I'm helping reelclassic with his 2003 lmtv here in Jacksonville. We are having to jump power across solenoids behind main power switch and we have 24 volts going to green ignition switch on dash but no power to start push button. Engine will roll over great if power is crossed...
Top