Search results

New switch installed and starts just fine now. Many thanks!

Thanks so much I'll search for a switch, ebay has one for $300..ouch...I can't tell you how much I have appreciated all your help. I'll let you know when I have changed it out.:D

I checked the power at the S-1 switch in off position. only pins 2 and 4 have 24v...so I need to trace power down from pins 6 and 8 to find where the break is for these two lines. Looks to tedious task, will LYK what I find when I find anything. At least it would seem the switch may be...

Many thanks for all the help...without being too ungrateful, would you know which terminals should have power on the S-1 switch in the off position. That way I can at least rule out wiring to switch. Thanks soooo much!

Thanks, I'll check the switch as soon as I find a switch continuity map to follow. Thanks so much, oh and my switch is the blue plastic one, so if it prone to fail, that's a good lead for me to follow. I'll keep you posted. Any ideas where to find one of these switches? I found one on ebay, but...

I have 22v on circuit breaker CB-1, both sides, but nothing on S1 pin 7 in start position. Im trying to figure how pin 7 gets 24v..from the switch or from some other source. If its through the switch, maybe switch is out, but it feels fine. In start position, only 22v on pins 2,3,and 4. I really...

Fuel pumps run in prime position, fuse is good, e-switch pulled out(22v present here when pulled out)...on s1 start switch in start position, power(22v) only on posts 3,4,and 2. Nothing on any others when in start position..the 10a circuit breaker switch can't move...up-down or rock in...

don't know if this means anything but the fuel gauge is pegged on full, even tho there is only about 7-8 gallons. Also the panel lights don't work now. As far as circuit breaker, I can't move it up or down or rock it one way or another. It appears it is in the down position. No voltage on either...

I appreciate al your info. I also have a mep803a that was running fine, but when i went to restart about a week later, nothing at the start switch, but dead crank fine. On start switch in start position have voltage on #2, 4 and 3 only.E switch has voltage on both sides and none when in off...