• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. W

    6.5 Turbo Swap Down Pipe

    I will try that and see what happens. Thanks everyone for their help!
  2. W

    6.5 Turbo Swap Down Pipe

    Guys I just got a deal on a 93 6.5 for $350, and I have a question about exhaust. I've searched all over on here for what people have done for a downpipe on converting their CUCV to a turbo, and have come up empty handed. I've also looked all over the web and cant really find many who have taken...
  3. W

    M1008 turbo and serpentin swap

    [Eventually it will have A/C as I slowly acquire all the parts and pieces. Just bought a donor 6.5 motor to get all serp stuff, and turbo off of. I was going to replace all the accessories and wear pieces while doing it and saw your post about the Duramax fan. I was going to replace the clutch...
  4. W

    M1008 turbo and serpentin swap

    Did the Duramax fan just bolt right in or did you have to have an adapter ? Also did you have to trim the shroud?
  5. W

    M1008 CUCV Gen 2 Light

    Update! I got it all fixed by putting a new alt in the ol girl now she charges like a champ. I will tell everyone though When you buy one of these vehicles the first thing you should do is disconnect every electrical connection, clean it thoroughly and use liberal amounts of dielectric grease...
  6. W

    M1008 CUCV Gen 2 Light

    Ok so here we go I have spent months on this beauty and have cleaned every dang electrical connection and applied dielectric grease to them all. Everything works like a champ now and I have figured out my problem. Alt 2 is bad! so I rebuilt it, replacing every part except the rotor and stator. I...
  7. W

    A/C

    What did the kit set ya back? I've been looking to do this same thing.
  8. W

    M1008 CUCV Gen 2 Light

    Well to start i did check the ground by the parking brake and all is good there. I did not check heater ground since it was working fine but will. the horn wiring is there and it all works with volt meter, however the horn itself was bad so I have removed until I can get another one. I did not...
  9. W

    M1008 CUCV Gen 2 Light

    Guys I'm new here so please have mercy on me. However my problem is that my Gen 2 light comes on dim (like half lit) when I turn on the ignition and then stays the same as the truck is running. I have been through all the posts on here and, all the TM,s. The truck is stock with nothing other...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks