Search results

Had the hydro-booster go out on the 1152. When replacing, TM -2 , 7-14, makes no mention of bleeding the unit. Is there a process someplace I am missing or it tied directly to the power steering bleed procedure? Thanks

Engine starts, runs great. Wait light does not come on. I have been following the troubleshooter in the TM and got to the point of testing voltage to the light itself. Troubleshooter states check for voltage on wire 27. I only get 6 volts at the wire. Trbstr does not state what voltage should be...

I picked up an s280 shelter, and am going to redo the inside to use as a camper to put in my LMTV bed. But before I go too far, I'd like to know if someone can give me and idea of the floor structure before I tear into it. I will say that the steel slides or runners under the unit are nearly...

Just a thanks to recksmilparts. Had the exact item part I needed, good price and communication. Thanks! Joe

I went through the TM for the ctis troubleshooter. I am having the ctis overspeed light come on while sitting. The setting is to hwy and all tires are inflated. As you move off, the light goes off on the dash, not sure what speed, seems to do it whenever. I have seen issues with it NOT coming on...

97' 3116 LMTV. If I pump primer bulb, it takes about 10 pumps to get "solid" feel. Go to crank up and get tons of smoke for 30 seconds, up to 45. I usually only push the starter about 5-10 seconds max. It will occasionally sputter through the whole 30-45 seconds before finally clearing up in a...

My trailer supply valve in the dash leaks a bit at startup then seals up. Has anyone rebuilt this before, or does everyone just order another?

I have a 97 LMTV with the 3116. I have crappy readings for oil pressure. I checked with my mechanical tester to verify. I am looking to replace the sender, after checking wiring and cleaning up the connections. The part # on the current sender is 12420859 with another mfg # of 7z634. TM-P #...

I am looking at replacing one or two of the hoses on my lvad wheels. Figure 158 in parts diagram, item 27 and 18. Rubber is falling off and steel webbing is rusting. I have only found one source only for each, at a hefty $72 and $161. Anyone know of a more family friendly budget source?

I need to disconnect the batteries to patch up some holes. I’m confused with all the batteries in this truck. Where do I need to disconnect in order to avoid frying anything? 97 lmtv with all four batts installed. Thanks!

If anyone has pics or part numbers for the helmet top windshield edge clamping hardware and the tool box handles please post them or send me a message. I only have one handle on the back door and nothing on the edge of the windshield section of top, only what appears to be screw holes. Thanks.

Why would there be 4" strips of Velcro all over the body of my m998? Its very frustrating to get those dang strips off. Rant over.

Anybody know what pressure rating the relief valve on the air tank under the bed is rated too? 125, 130 150 etc?? I snapped mine off removing the bed. I looked through my tm notebooks and cant find any reference to it yet. Thanks

I am looking for cost info on anyone interested to hauling a non running HMMWV from Saraland Alabama to Rutherfordton North Carolina in the coming months (after EUC comes back). Thanks for your help.