Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I am pretty confused about how to ground my whole system. Originally I thought I would drive a grounding rod near solar panels, at the Conex box housing my batteries and charge controller / inverter, and the generator back up. I have come to learn that would be a bad practice that could fry...
SEE HMMH HME Owners
The number under the topic is the post number, to convert to the page divide by 20 and add 1 to the value.
So for example: for discussion on fabrication 9/20 = 0 + 1 or page 1
for NAPA oil and fuel filters 31 / 20 = 1 + 1 or page 2...
I have very similar symptoms to this thread: MEP 803a no power to main lugs
My generator is not outputting any current at the main lugs but is at the convenience receptacle as described on the above thread. I believe that it was putting out current at the main lugs last spring after I got all...
I have a friend that is hauling a 40' high cube shipping container for me. He has a new trailer and worried about damaging the trailer when we unload. I told him there is no way we are going to just lift it off.
The easiest way but likely most expensive would be to buy some OSB sheets to...
There has to be a number of threads on this, but I have not been able to locate one. So I apologize in advance.
What I am looking for is an appropriate way to use the generator when in the back country, a hunting camp for example. Rather than every body running their own noisy generator I...
Unlike a lot of you I have been relatively lucky with my fuel issues, I guess it is my turn now. When I bought my SEE, I had it delivered to my house in the city so that I could work on it. At that time it seemed to start and run just fine on the snake oil that was in the tank ( I assume JP8 )...
I bought one of the GP MEP-803A gensets. It was sold "Not operationally checked", so it is a bit of a crap shoot. I was wondering if anyone else is willing to share their experiences with buying one of these. I have been going through the MEP-803A threads, and I ordered filters oil belt etc. and...
For better or worse I am now the owner of a trailer mounted MEP-803A gen set. It is close to where I live, so I intend to row it. I know it will be slow going, but like I said I don't have far to go. The pintel hitch is easy to deal with, and I can splice in a different electrical connector...
The dust covers on my SEE were toast when I got it, and I believe this is a common condition.
The cost of the dust covers is nominal, but to replace the ball joint is not cheap. The actual ball joints in my case are in great shape, but will not remain that way without fixing this.
The problem...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!