Search results

just picked up airbeam tent. looking for clean envior to dry hemp. the beams have black, like mold? id assume theyd use material that cant easily

The LH-RH valve on wrecker. When i move the valve to underlift and right winch it works. but when i change to LH driver winch/ stifflegs, it sounds like clutch not engaging a trans. RH still works. havent taken apart yet. its harvest time for hemp

yea it has hydro. i think i put in about 20. i think its something with the RH-LH valve. just need time to go through manual

i got it out of the field without retracting. r12 relay was first problem the crane has some movement when i turn it on and set controls but i havent been able to set the legs. manual says the top row of mhc shouldnt work until they are set rpm meter doesnt work. i took a picture of throttle...

yea, i held valve up and pumped with no luck, probably 50 times and tried holding both rh lh o/r and pumping. didnt feel pressure building can i just dig out outrigger and hookup come along. unhook hydro hoses?

trying to retract passenger side outrigger's next to control's I can extend down more but it wont retract. is there a trick? do i have to extend fully?

any reason not to use heavier top spring? thin one is from original relay

pulled apart old valve and found little black plastic pieces. didnt focus right guessing its going to lead to more problems. does that cracked seal serve any purpose? new relay doesnt have

ill strap it down. is the crack pressure 7psi?

have permatex with PTFE. just watched a video of a valve rebuild. seems doable. any reason not to swap out insides vs trying to get the fittings off

just got the time to take out but i cant get the fittings off the valve? is there a trick or should i just go buy new ones?

its the bottom one

thanks, its comes tomorrow. i looked forever in that TM

I got a tent from gov planet yesterday and just trying to figure out ltl pickups from a base. Ive only picked up in person before. Fort Wayne 46803 Tim T. contact Crate is 850 90"x46"x42" and im getting quotes to ny for 250 Is it easy for LTL to pickup on a base? gp says driver must have...

both rear front are flat. when this started it was only driver side rear front.

ill start it up tomorrow and check, i think last time air was only leaking from bottom one its m1089 wrecker

ended up buying wrong one. i cant figure out what the valve number is. anyone out there better than me at this? i tried N50004D

valve is almost same price as rebuild kit. waiting to hear about shipping. is there a trick to get those hoses off?

caged when i towed from govplanet. level grade on property, ill tow with grader cant figure out why it went out of no where. local guy came over and told me i was engaging trans and releasing brake in wrong order. could i be doing something wrong?

its in the middle of a field. found the relay valve in tm, thanks. think there is anything i can do to get out before?