• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. X

    88 M998 leaking front Axel shaft

    I'll take a look at the hubs, i think all four had X's. I'll definitely make sure they good before my next ride. :driver:
  2. X

    88 M998 leaking front Axel shaft

    I just got my 1988 M998 titled and register, so I took it out for a drive. Came back and saw it was leaking from the driver side Axel boot. Is this something serious?
  3. X

    Turn Signal Switch replacement

    I'm assuming both of these can be used interchangeably, but just want to make sure before i make a purchase. Also is there any benefit of one over the other? 11613632-1 11613632-3
  4. X

    m998 no lights

    So i ended up opening the 3 lever switch because i though i was going to have to replace it. Seems like its pretty clean inside, look newish too... is there an easy way to verify the switch works?
  5. X

    No fuel to engine

    Yeah its El Paso, at my parents house. So i can only work on it when I'm on vacation. I'm in dallas, tx.
  6. X

    m998 no lights

    The wait light and the brake light work, but brake light stays on all the time. Headlights, blinkers, horn, nothing else works. hmmwv turns on and runs fine. Is there a fuse box I need to check? did a search though the forum, found...
  7. X

    No fuel to engine

    Finally got some time to swap out the fuel pump, followed all the advice given plus some other found on the forum. Removing the right splash guard makes the swap easier. Also had someone crank the engine while i pushed in the push rod to find the position where it was most out of the way...
  8. X

    No fuel to engine

    I haven't tried bleeding the air out of the lines, Do you by any chance have the instructions? Found these: http://www.hummerknowledgebase.com/fuel/bleed.html but looks like those apply to when you have bubbles in the lines, looks like my lines are pretty much empty.
  9. X

    No fuel to engine

    Used a bigger bottle this time, had the engine run for about 2-3 minutes, No fuel out of the fuel/water separator. Checked the fuel pump line coming from the fuel tank, maybe like 3 or 4 drops of fuel came out. So i guess my next step is to replace the fuel pump. https://youtu.be/CQrs62cGWBA...
  10. X

    No fuel to engine

    Ok, tried putting 10 gallons in the fuel tank, cranked for a couple minutes it still didnt start. I took the hose off of the fuel/water separator going to the injector pump, i put the line into a bottle of fuel and the engine stated with a few cranks, actually ran pretty good. Only ran for a...
  11. X

    No fuel to engine

    This it's my first hmmwv, bought a non running one, got it a couple months ago, just got some time to start working on it. Engine cranks but won't start. Checked hose at fuel/water separator nothing there. When i got the hmmwv fuel tank drain plug was missing, relaxed it and put about 2...
Top