Search results

Just banging my head trying to figure out what would cause the 12v wire to the Transmission Control Module to read 6.7vdc. I've checked and cleaned up the battery posts and 12v connections. With the 2 12v wires that attach to the 12v feed one wire reads 12v and the larger one shows around...

A complete pair of half rear filler doors.

Pair of troop seats from our M1152a1 300.00 obo 928 404 5142

2010 M1101 Trailer Tan with new Top and bows . 3400.00

I have a front set of hard doors that are new looking with good glass and all the hardware. Looking for around 1700 for the pair. In Bullhead City AZ and Laughlin NV

so I had purchased a great running M1078 and noticed when I bought it that the CTIS connector that connects to the CTIS controller was missing. I was fine with it until now. I have done some exploring and found that the connector P110 was cut off and the rest of the cable was pushed into the...

does anyone know about the 6L80 that came in the M1151A1? I seem to have an issue with the shifting = meaning that it seems to need some accelerator pedal release each time I need a higher gear. The fluid is fine and red. I serviced it with a new filter and re=usable gasket. One note is that...

so i picked up a m1151a1 slant back at govplanet and it seems complete after my initial inspection. i have changed the oil and all other fluids seem clean. the spedometer gauge panel with the gauges was missing but the tech who removed it left the wiring in good shape. still has the plugs and no...