Search results

I have converted my headlights to LED a and now want to do the turn signals, markers and brake lights. Do I need to change the flasher or it still work?

The driver‘s side fender fold out on those trailers also which help squeeze through.

Thanks for the info. I searched the same way and just got this graphic referring to 12, 13 and 31: The transfer case wiring harness is part number 12342789. https://www.eriksmilitarysurplus.com/wihaforhmtr1.html

Sorry for raising a dead post but i am hoping some one can provide an answer for the next guy to search this. I am finishing up a 4l80e swap on a truck that had a 6.5 and 242 paired to a 3l80. The 242 transfer case wiring harness was there along with having the T/C Lock light mounted but the...

Not my video.. Smoke starts at 2:23 - might as well install a keyed ignition switch too 😁

He installed it backwards in the video. Straps should be inside and clear plastic should be against the seatbelt towers.

Or for when a state like California comes after them.

This was on the outside of my package:

Not my video.. Smoke starts at 2:23

The antenna mounts were part of the demil process on my M998. I was left with a metal plug with a hole drilled in the center for the cable. I found a replacement plug here https://www.ebay.com/itm/4-Pack-1-1-2-Metal-Hole-Plugs-Nickel-Plated-SP-1-5-NK-/282855509314 These were also used for...

In

Why not just figure out how to hook up the $40 New Zealand timer? No matching temp sensor needed and it gives you total control? Seems the most cost and time effective route?

I believe I read in one of the TMs that belt flop is normal at idle.

Ok I’m not wheel sizing expert..... I am trying to figure out what backspacing on the 17x9.5 Black Rhinos for as close to stock. I have searched here and the Facebook and -18 mm offset seems to be the most mentioned but I have also been told +6mm. Since the stock wheel is 9” wide with a 7”...

I have have a 6.5 and 242 and have been looking at both the 4L80e and 700r4 and to do it right, the $$ difference between the two is not that significant.

So after reading good things in this thread about the 700R4 kit offered by Dirty Boyz, I started digging to look how to contact them and I came across a FB post from about six months ago from Mike at Dirty Boyz: Anyone know what the issue(s) were? Looks like the business is no more and it...

In

Plastic. I finally got it in . I was working through a opening that was previously cut in the floor. After moving the pick up sock and peeling back the opening a little more allowing me to insert it perpendicular to the tank the entire way, it seated. Thanks![

I am going through my new to me ‘89 M998. I ordered the new style fuel sender (5716625) from auction site from known seller - listing for M998. I go to swap them out and the new sender seems to be hitting the baffles in the bottom of the tank, so it won’t fully seat. It’s about two inches too...

Thanks, I appreciate the info!