Search results

Ok fans had an oil leak on the m38a1 and couldn't figer it out. Check your Donaldson valve on the fording system. Had mine in the wrong position this is part of the fording system. valve was backwards and closed so it was blowing oil back into the crank case witch was the leak. Problem solved...

Growler Gallery Carolina Growler - Rugged Utility Vehicle | ncgrowler.com I am going to try to e-mail today and see if they are. Think it is worth it?

A while back their was a company down in florida that was making m151 and rebuilding them. Is this company still doing this? any info on this. Joe

Who has the old 2 pin jumper cable ends NOS need to make a set of jumper cables between two military jeeps. Also are the pins crimp on or saldered? and were could I find the pins.

Ha all wanting to see if any one has a landing leg for this Electonics Trailer posted awal back. Also looking for the front porch that screws into the frame of trailer. In lousiana

well my man a lot of them are on flats and some have cuts on the tirers I know they be sitting for about 6 to 7 years. We are expected to get snow in the morning. If you go around lunch time they will not be their. Check in at the side gate and drive to the back they are all out side. Good luck...

Need to find the metal ends that go to the tarp bows. Need a name of company who has items. Thanks Joe

Need some help having to move the trailer to new house. The only problem I am missing the landing leg on the left side of the trailer. It is the detachable one so the trailer can be set flat on the ground. Does any body know who would have one surplus? Also what attachment would I need to pull...

Her is some pics of stuff I have to move and found while at my old mans shop

Well been doing a little on the jeep. Need turn signals. Check out what I did and see if it looks ok or not.

just get you a duce wiring harness and redue the hole thing. That is what we are doing to my m38a1. We are taking the turn signal of the duce and mounted it on the sterring wheel.

Thanks for the help if you have pictures I would like to see

pic Her is the picture

Just wanted to see if any body out their has seen a price stencile on a m38a1 windshield? See pic. I found a good windshield unit and after cleaning it up this was revealed.

m38a1 Jeep Parts [/attach][/attach]ach]

I have pics I will post some time today

Ha youall just wanted to put my two cents in. Have a m38A1 jeep that I am restoring. Hit the jack pot the other day and found several parts that a Guy had in a old silo. To my ammazment he had hoods, fenders, grills and spare parts still in the wraper. Had carb rebuild kits still sealed in the...