• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    MEP-831a Overload

    thank you Guyfang, just a matter of time on GL out here in Hawaii...then that nice surprise one day!
  2. R

    MEP-831a Overload

    roger, will look out for one.
  3. R

    MEP-831a Overload

    anyone know where to buy an inverter for a mep831 that has shorting issues?
  4. R

    mep831 inverter

    Thanks for your reply kloppk, Good advice. I couldn't find any grounds, but I did realize that the back 6 bolts were missing...also the side tab I was talking about somehow does not make a ground to the chassis. Once I put a ground from the chassis to the case of the inverter...all...
  5. R

    MEP-831a Overload

    Before the thread was hijacked, the discussion was about inverter shorts. I was having the same problem and realized that the inverter is not properly grounded because of the paint on everything the bolt head touches...then when there is a little moisture, whammo. so, what if you just...
  6. R

    mep831 inverter

    Have been spending a lot of my time trying to get this Thing so it can produce power. Finally, it is starting to look it may be reliable, however, I noticed that the two bolts I used to secure the inverter to the box is sparking between the bolt heads and box; I used extra long bolts with a...
  7. R

    MEP-831A Changing out the not so convenient Convenience Plug

    Hey all, first post. What if you just used 12 gauge wire, from L1 and N on the inverter...directly to a 20a convenience receptacle and GFCI....protected by an inline 20a fuse?? Would this be an alternate method of accomplishing the same thing?? If you did that you could negate the main bus...
Top