Search results

hello , we are looking for a part number or direct replacement for the wiper motor crank arm for the new style (vertical attaching ) wiper motor( basically attches to the ball stud on the motor and has a ball stud that goes thru the wiper linkages. i found the part in maintenance manual but no...

will give it a look ! pretty sure we have a timing issue here !

sorry for delay , appreciate response ! its a 3 speed standard old humvee 3L80

hello ! we just took in a m998 an 86 but had a recent gep swap looks like somebody rebuilt the injector pump as well we have limited knowledge of the trucks history / the truck starts and runs fine idles fine but under load w acceleration it iot bogs way down and will essentially not pick up...

believe it or not posting this for an old nam vet friend ! He REFUSES to use computers ! he has an m998 and called me other day (he does have a cell phone )and gave me following scenario : rough idle and power loss / he changed fuel filter / he cracked the injector lines and good fuel /I...

hello , I hope some of you guys can help steer me right ! picked up an m998 runs out very well but hard start and kicking lotta white smoke followed by big puff of black smoke / then clears and runs great / easy start when warm . Assumption of course plugs / guy we bought from said he just...

sorry no was saying I have 3 mil spec tcm (in the green box) as well as 3 harnesses essentially plug n play but /the bodies they will be going to be mated with are all m998 w A1 body harness thus nothing to attach the tcm to ! I do have 1 aftermarket tcm and harness and I believe I can use that...

hello gentleman as always i am amazed at the knowledge base that exists on this site ! unreal stuff that aint in no manual!!! we are redoing a couple 6.2 l/3 speeds and doing 6.5 l na /4 speeds have been searching form findings snippits of info but the question is ; we have an aftermarket...

Hello and as always , your insights are very much appreciated. We are in process of doing our first turbo swap it is replacing a 6.5l n/a in a 2001 m1123. Mechanic called me and said doesn't fit . Uggh!! From pix he sent me (i am out of town till next week ) looks like it is not clearing the...

5 pints sorry

yes it is a4l80e we just changed filter and replaced the fluid 5 pints reads full / military tcm /how is it u check codes with a paperclip that trick there would be valuable knowledge please enlighten me !!! thx anything else cause limp mode ?

we are hoping to get some guidance on an issue about to drive us nuts we are finishing an m1123 overhaul and after fuel issue nightmares, we thought we were home free but the the trans will operate only in reverse and in first , and of course no dice on testing codes as we don't have a J1 6...