Search results

Yes,your right!so one comes to another,i don't own such heavy things,but i like my '91 Volkswagen doka from Bundeswehr....a vehicle to put a sem35 on. Ok,but lets get back to my Problem.i need a manual to aligne my 25 T 😠

Hello, Now i got troubles with my prc-25T;the vfo a38 was dead,i bought a new on and now i have to aligne it.Problem is the 2 frequencies that are different than the ones on the prc-77.has anyone a tadiran prc-25 or a manual for it? Thanks and best Regards from Germany, Timo

Hello,and a Happy New Year! I fixed my loosing filament voltage Problem:i renewed both capacitors C110&C111,and now i have a constant filament voltage choosed to 1.45v.

@Cagosti : What replacement did you choose for the Stack diodes/selenium rectifiers in the bottom of the case?cr102/cr101

Thats right,and it works really great on a couple of FM cb radio channels.I bought it on ebay,with harness and antennas fresh out of a Depot.

Hi Phil, Thanks for your answer,is this diode on the bottom of the housing,wired in the connecting cable from receiver to power unit? The more i use the receiver the longer it will keep working.but its still stop working after a while. Its a great radio,i have it in my living room connected with...

Hi Phil,die you find something in your Manuals about my Problem? Timo

Hi Phil, Im a little bit related with tube Radios,but this Problem i've Never had.the Power Supply was s out of the Case when i switched it on Power,filament Voltage was 1.70 volts.then i tuned it with the poti down to 1.40volts.as it was written in the manual... After a while ,about 6-7minutes...

I used the 6v and 12v Power source. Best regards Timo

Hi there, I have a Problem with my Angry 5.After a while (5 minutes) my Receiver is working,the Filament Voltage is getting lower and lower.I already checked te both Vibrators,cleaned and realigned the contacts. Has someone an idea? By the Way,what Antenna ist the best for the Receiver? Thanks...

I Need a Mixer Modul for my PRC 9 ,has someone an Idea where I can get it?

I took an PRC 25 T (TADIRAN) and it works on a few CB FM Cannels.The Frequencies start at 26 Mhz.See my Thread "PRC 25 Buzzing".Here in Germany we have up to 80Channels CB in FM and AM.I also worked years ago with a PRC 9,but it was not so good,low Modulation,scratchy too,the AFC is not very...

Ooops,sorry!wrong thread!!

Hello tennmogger,Yes,ist really fun,specially your 150hz Tone Squelch;we don`t have such a technic in our German Radios :-).I have a PRC 9 also,but it doesn`t work anymore,thats my my next Project.I got the SEM25 in my Garage,powered with two 12V Batteries and the Original Antenna with the...

Good morning, Ok,I understand,the Squelch in my 25 probably just works with the 150hz Tone.Inspite of this,i will make a try to "adjust" the pots in the Squelch modul;marking the Start Position in Case it doesn`t work. This 25 is the Israeli "T" Version build by TADIRAN,I knew that the american...

It`working[thumbzup] I Tried a few Channels on a 15km distance CB Radio Station and Iwas read Loud and Clear with strong Signal,I was working on a Gainmaster Antenna with 3,5Watts Power.But Please explain me the working Feature of this Squelch,and how could I aligne the Frequencies in the 27Mhz...

It`working[thumbzup] I Tried at a few few Channels on a distance CB Radio and Iwas read Loud and Clear wirh strong Signal,working on a Gainmaster Antenna with 3,5Watts Power.

@ Papakb :Ok,I understand what you say,I just`killed`the 150hz Tone,I couldnt make a Test Yesterday if it works now,but i do that later today and give you a Report. So I´m not sure if the Squelch on my RT-67 was on,but when it was:wont the incoming strong Signal from my 25 open...