Search results

On a GEN 2 would you happen to know how many ounces of refrigerant the system takes?

Thanks for looking.

Thanks I’ll keep looking.

You wouldn’t happen to have a wiring diagram of the system?

Thanks I did replace the voltage regulator. And relay K 11 but I’m still not getting 24 V on the exciter terminal. If I jump 24 V to the exciter terminal the alternator works both lights are flashing green but the battery voltage does not change. Removing the wire from the AC terminal which has...

OK checked all the batteries two of them are 12.5 and two of them are at 12.7 installed a new five Pin relay And it is clicking when turning on and off the main power switch. If you would be so kind to give me a call area code 702-622-1909 I’d really appreciate it hard to do this by text. Thanks

I’ll check the individual batteries for voltage this morning replaced all four batteries less than two years ago. It sounds like the LBCD Is working properly it must be assuming that the batteries are fully charged correct? But still do not understand why I’m not getting 24 V on the lead going...

I’m getting the 24 V from the connector that provides power to the air conditioning unit I’ve installed a switch on the dashboard. I have a 12 V digital voltmeter across the batteries. So when ISupply 24 V to the exciter I see no change in the volt meter. When I disconnect the lead to the AC...

With the AC wire hooked up there is no output to the alternator but the two green lights are flashing back-and-forth.

With the engine running. I jump heard 24 V to the exciter terminal if I leave the wire connected to the AC terminal which has 24 V on it hooked up there is no output voltage from the alternator. When I remove the wire from the AC terminal the alternator charges As it should but has no...

Another question there is a Waterproof circuit breaker in the battery disconnect box do you know what that It’s powering?

Just a thought does it make any sense that I have zero voltage on the exciter wire and 24 V on the AC Wire?

Thanks I’ll check those two Relays.

Just saw your post. I have a 2007 A1 that the no charge light just came on. I’m wondering how you resolved your problem and if so share that with me. Checking the voltage on the two leads going to the regulator I have 24 V on the AC terminal and 0 V on the exciter terminal the one closest to the...

That's great I have a 2007 M1078A1R bought it was 1700 miles on it and drove it out to Las Vegas from Pennsylvania . no issues

That's great how can I get a copy of that TM Thanks

No

No air pressure in tanks gauge on occasion reads 120 lb . Otherwise reads normally mirrors properly working second gauge!

Did you ever get a copy of the M1078 A1 Technical Manual ? If you did if you'd let me know where you got a copy of it. I'd appreciate it . I'm looking for the location air pressure gauge transmitter . I've been told on an AO that is under the left hand side of the dashboard . but on my A1...