Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I pulled the fuel sending unit, it works as per TM. The fuel level gauge does not work now. I pulled the plug to FAULT board, the genny runs great! What would be your best guess?, is the board bad?
Okay that sounds better, I'll let you know what I find. I pushed S7 up and let S1 go to run position. The genny kept running like it should, so that indicates what? bad floats
Shortly after bringing the genny home I put new batteris in her. The genny would start and run but ran rough. I did some research for this problem and one of symptons pointed to the pump timing. The pump is brand new so I thind prior owner installed it incorrectly. The pump was not timed...
I held the S1 switch in the run position, pushed in S17(the kill button). As soon as I pushed in S17 the genny died. Yes the idiot light came on also. I don't understand the test.
2007 MEP804A will start but will not run. Red trouble light--no fuel. The tank is full, I do not hear any priming when the switch is placed in the prime run position. Any help or ideas. I have had this genny for several years and have tried numerous things!
I have a 2007 MEP804A generator. I have had nothing but problems with it. First off someone installed a new pump and timed it incorrectly. I retimed it. It would run in the start position but would die when the switch is released. I found the 3A cold blow fuse was bad, purchased one and...
I did not do a load test as yet. I get a little puff of black smoke on start up, which is normal. When jennie is running there is a constant plume of heavy diesel smelling whitish smoke. It is not over heating or consuming coolant. I have never owned one of these so I don't know how it should...
Hi all, I purchased a MEP804A generator on a trailer. It starts right up and runs smooth but it is over fueling. It has a brand new injection pump on it but I think it might be a tooth off on timing. I need a IPB and tear down manual for this, it has an Isuzu 4 cylinder diesel. Any help or...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!