Search results

Have a M920A1 with a Niehoff N1128 alternator which requires the Neihoff N3212 Regulator. 12v is out, and the regulator alone is about a grand to replace with weeks of wait time. Is there a commercial replacement for this alternator and regulator? The TMs state that the A001-09-0555 is for...

Working with FuzzyToaster, we kinda hit a wall. I did find a way for the shift patterns to be altered. This is what I shared with FuzzyToaster: Found a place that will work on the gear ratios. Clarke Power Services worked on my TCM and it is shifting much better than before. I went to the one...

AM General no longer makes any parts for the trucks, just the Humvees. Did find out that Midwest Military Equipment can get them and Eastern Surplus can get them. Miswest was a little cheaper, so they got the order!

Found an AM General Part number for the CB-1125-12 ... It is M/163-20006 Hava a call into AM General to see if they still make it ...

AM General NOS 2 Key Door Lock Assembly P/N 5731974 NSN 2540-01-152-9247 Found these on EBay. They are a direct fit on my M920 Truck!

Started a Conversation with @fuzzytoaster ... THANKS! this Global program is really a "protective" program, but sure lugs the motor which is not good!

Fair enough ... But I am not grinding down the front drums for the 22.5s and cannot afford to upgrade this truck, at this time ... Besides, I have spares, should I have a drive tire go down. Just trying to supplement a retirement with hauling and digging in the ground ... Don't see the need to...

Well, not completely .... I am running this converted M920 up and down the highway to the quarries and to my customers. I also have a tag trailer on this truck hauling medium Caterpillars and larger farm tractors. True, I have went into fields and dumped loads and barely got out with the 6x6...

Apparently, my eyesight is not good .... The CV joint on my truck is no where near little, and my vibration has started 3 years after owning this truck. I will try the mounts first, and then the major mod if this does not fix the issue. I am running this truck as a commercial vehicle, and have...

I am just an Owner/Operator too! Bought this truck to start a business and trying to keep the truck going. Converted from the M920 to a dump truck. Had to upgrade the tires from the 1990s to current to keep rolling down the road, and keeping the tread on the sidewalls. This truck was...

THANK you for the replies! Knew to ask the experts!

I am looking for the Motor Mounts for the M920 truck. TMs state they are CB1009-9, which I cannot find at all, and CBA28-800. Do you know of anyone that has these "grommets" or can make them?

What are the price of your 16r21s?

I am concerned with the grinding of the hubs, since I am using this truck as a business. Don't want the legal eagles swooping down and nailing me if the 16r21 mod is hurting the safety factor of the truck.

How much grinding is required for the front, for the 16r21s?

Did the 16r21 military rims fit without any mods on the M919? I am trying to single the M920 which has the same wheels originally on the m919.

I run the basic Automatic Transmission Fluid in my M920. The ultra low sulfur is too dry for these older engines. Talked with some mechanics, and the ATF will keep the injectors and the pump clean, and this helps with the dry fuels. I also run the Power Service white jugs to keep the fuel...

Had the issue with my M920. Check the voltage on the shut off solenoid. I had a 24V shut off and only had 12V at the solenoid. Replaced it with the 12v and all is working as it should.

Thanks for all the photos and details! Really wish that I had the COOL tools and the talent to use them like you obviously have. What a talent to be able to make the parts like you do! Thanks, again for the help, advice, and quick responses!

THANKS! I bought a Harbor Freight "deer pulley" system and replaced the poly rope with a nylon braided cord. Just made some loops for the top of the brush guard and one loop around the tow eye, and just pulley it up. Seems to work, since I will probably not be around an ATV when/if I...