Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Use a m105 cover and bows. You can rivet little tie down points into the sheet metal for the bed and it works well. My FB post of the truck shows the tie downs and a bad picture with the cover on. https://www.facebook.com/marketplace/item/1047403089694225/
I would like to say thank you for all of your work over the years putting on the rally. Growing up looking forward to this event every year since I was probably 10. As a yearly participant of the rally for over 10 years I know myself and others will likely still have a get together at one of...
Throwing a penetrating oil or lubricant in my experience has completely eliminated the problem and others they still have a small snag at the very end of the throttle. I would recommend.
I sold my 3 FMTVs because they were taking too much of my time. My M932a2 in comparison is a fraction of the headaches. Both have pros and cons just didn't like the pros enough to justify the time.
Should be this. I had a 2511 code in my M1083a0 and needed a transmission rebuild from a blown pump.
29505601
https://www.allisontransmissionpart.com/allison_parts/56/01/29505601.html
Need to test actual fuel rail/ line pressure to see if it meets the proper pressure spec for the engine that is in the vehicle. If the pressure is too low then a pickup tube could be clogged or a line or the injection pump be bad. Also it could cause the injectors to not fire properly on some...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!