Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Yes, you can flip that part around, no problem.
Actually I wanted to see the other side's dogs, too. But if you say those look new, than its OK. Just install that side facing to the rear, to engage the large gear (= high range).
Very curious to know what happened with the synchro from that...
I'm with Gimpyrobb: that part looks to be re-usable, even if the front tips/ edges of the dogs are a bit rounded, already. Kind of hard to make a final judgement, based on those two photos only.
Wait until you have the other one out, and compare both. If still in doubt shoot some more close-ups...
Tools? Depends; to remove/ install a T-case: a strong 4"x4", 4' long; a chain hoist; to open the cases: common wrenches; maybe a 1/2" impact with 5/8" socket; to disassemble the input shaft assembly: hammer & wood block, or better a bearing puller, or even better a small arbor press; plus a good...