• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. sggoat

    replacing wood bows on M101 A2

    Dimensions for my original bow wood is: 57-3/4" long, 1-3/4" wide, 1-1/4" thick. This is the bow wood, not the side boards---do you need the dims of them also?--can measure them for you if you need. I did find out that the Mahogany is most likely from the Phillipines--best I can determine, it...
  2. sggoat

    replacing wood bows on M101 A2

    Mine are all Mahogany, so they may be a little off from the White Oak. I can measure tomorrow and post dimensions(I had to make two replacements) When you say 'composite' what is that?-carbon fiber?
  3. sggoat

    replacing wood bows on M101 A2

    Fuzzytoaster is correct-4 wheeler and mower-or anything else that will fit. The front bow originally had a metal bow--I replaced it with Mahogany to match the others.
  4. sggoat

    replacing wood bows on M101 A2

    I think I must have goofed the post before, but, the corners were blasted, primed and painted w/ Rustoleum Aged Iron paint. Bow Carriage Bolts & nuts were all replaced w/stainless and painted copper. For the sides, the bolts(flat head screws) were all replaced w/Stainless-into captive nuts--all...
  5. sggoat

    replacing wood bows on M101 A2

    here are some pics of my A2 wood rails and bows---
  6. sggoat

    replacing wood bows on M101 A2

    Those sleeves are like captive nuts-yes, they are necessary to hold the wood to the frame(speaking about the side wood here.) These nuts are available from local hardware stores(Ace). you can get them in brass/Zinc/Stainless. If I remember correctly, the bolts are 3/16"X 1 1/4" . They go through...
  7. sggoat

    replacing wood bows on M101 A2

    If your bows are bowing, it is probably a moisture issue. Reversing them is just what you should do. Keep an eye on them, and after they begin to get back to the original straight form, seal up the trailer somehow to stop the moisture from getting in----(The best method would be to remove the...
  8. sggoat

    replacing wood bows on M101 A2

    I did get matching Mahogany(well, almost-I got Honduran-I think the original was from Africa, or the Phillipines, judging by the grain pattern) from a local wood supplier(Alva Hardwoods). As in the prev. post, I dimensioned it ok and varnished using Epiphanes Varnish-lots of work up front, but...
  9. sggoat

    replacing wood bows on M101 A2

    Wood bows- My A2 has solid Mahogany bows and sides-this stuff is not available at any Lowes/Home depot and such. The guy I bought it from has 5 more trailers just like it--all Mahogany. I had to replace a broken front bow-got a good sized piece of lumber(Honduras Mahogany--2"X3"X10')from our...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks