Search results

Even though I had eliminated any problem with wiring/grounds in the truck, I moved all components to the bench. With just one or two LED's, a flasher, direction control, and a power supply, the same problem persists and is still cured by removing the interior pilot light or adding an...

No luck with the new flasher, works the same. I did notice that if I remove the indicator bulb on the directional switch everything works fine. So it seems the power that drives this bulb is backfeeding to the lights through the bulb. Disassembled the switch to check for pinched or shorted...

Thanks for all the input. I test wired in one incandescent in parallel on 460/461 and all 4 LED's worked perfectly. I ordered a new flasher of the same style. I suspect my 3 year old flasher has just developed a problem. Checked every terminal & wire and all grounds are clean and zero...

These fronts are some of the first Grotes, dated '06. I wonder If they dont play well with the newer rears? I remember a post that said they made some changes in '07. My flasher is a new SCR type dated '05. I double checked the wiring, all plugged in correctly. Used test light to verify what...

It flashes normally, just dimmer than before.

Got one. Flashes great, just goes from bright to dim instead of bright to off.

I'll double check. There are multiple circuit code numbers on each of the new lights, but each corrosponds with ones on the truck. 461,491, and 20. Have the ground run right to the frame, and park, blackout and flash functions work fine. Tail lights have been on for months, and worked fine until...

LED turn signal flashing characteristics I've searched for a couple hours already, and didn't see this covered... With incandescent lighting, my deuce turn signals and hazards flashed from bright to off. With front incandescent, and rear Grote LED's they functioned the same. Now I have...