Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You may want to look at the base gasket, there are three that are close but they don't allow vacuum to the accelerator pump properly. This would be a simple fix.
Here is a link to the different gaskets: http://www.g741.org/PHPBB/viewtopic.php?f=3&t=5348&p=41869&hilit=Carb+base+gasket#p41869
Bert
The TM callout for timing spec is wrong. This has been discussed many times on the G741 site.
I would set timing to 4 degrees BTDC with a timing light and then fine tune it from there.
I would also check your float height and make sure that it is NO lower than 5/64" below the top edge when...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!