Search results

thanks for the link, my base gasket looks identical to #2, my gasket kit was a NOS kit from ABLINN, I made sure it did not block anything on the bottom of the carb before installing it.

Yes, thank you, I posted in post 6 that I have been looking for a vacuum leak but cannot find one, where else could I possibly check, the carb is making a loud hissing noise, the wiper motors are disconnected at the fuel pump and it is blocked off there, so no vacuum leak at the pump, unless...

Yeah, idk why but I just feel like it's vacuum related a little, I disconnected the wiper vacuum from the fuel pump today and plugged it at the pump since both wipers were leaking and it ran without the choke but only if I kept my foot on the gas, after it warmed up it seemed like I had to...

Oh yeah, I have changed it twice, that's one reason I need to get everything right, I'm tired of changing fresh oil. I haven't had gas in there since the fuel pump was rebuilt though

Thanks for the suggestions, the fuel pump is putting out a good stream of fuel, the carburetor was professionaly rebuilt last year, and it is very clean, almost looks new, and i have cleaned it a couple of times just to make sure, i have ruled out the needle valve and float, but the float level...

Timing per the TM is 2 degrees after TDC, i will check the weights, i know they can get sticky, i'll look into it. Thanks

I have been, I can hear hissing out of the vacuum wipers, but surely that's not the leak, is it? It has a new base gasket, and all new gaskets on the carb, other than a known exhaust leak I didn't really find one, unless i'm missing somewhere, the vacuum part on the fuel pump is all new with new...

I don't think the dizzy is 180 out, it hasn't been removed at all, it ran great once I put the good coil in there, though with the choke on, the timing has been set to 2 degrees past tdc on cylinder #1, I confirmed all that while trying to diagnose the weak spark no start issue, there is only...

I have been tinkering with the m37, trying to get it running again, about a week ago, I was finally able to get it fired up for the first time, the coil was bad, the primary resistance was spot on but the secondary was non existent, it ran and it sounded pretty good, but it was still flooding...