Search results

Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: M100 Yea I kinda have this thing about doing mods from origional unless absolutly nessesary. If I can make it work again I will do whatever it needs and learn along the way.

Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: M1008 Glow P I have it jumped that way now but would rather fix it corectly. I may just disect the card and see what is bad and repair it. Or hop the fence at the 119th and grab one of theirs. Shhhhhhh I did not say that.

Re: RE: Re: RE: Re: RE: Re: RE: Re: RE: M1008 Glow Plug Issu If all thoes checks are ok which they are then the card is FUBAR Where can I get one, New preferably or used if I have to?

RE: Re: RE: Re: RE: Re: RE: Re: RE: M1008 Glow Plug Issue can the control card be tested?

Re: RE: Re: RE: Re: RE: Re: RE: M1008 Glow Plug Issue Yes the other terminal has power tested by test light. I did not use a volt meter to check voltage though. If all this is good what else is there to test or go bad?

Re: RE: Re: RE: Re: RE: M1008 Glow Plug Issue OK I have not gotten pictures yet but will do tomorrow. I grounded the blue wire terminal today and nothing but when the key was on it cycled the relay and the glow plugs worked. I am guessing by this and all other tests that the relay is good...

Re: RE: Re: RE: Re: RE: Re: RE: M1008 Glow Plug Issue I sure can, I will do it today. The thing is that it was working fine with no problems since I have owned the truck. I have had the M1008 for almost a year with no major problems until this. It was government owned before that so the...

Re: RE: Re: RE: Re: RE: M1008 Glow Plug Issue with the key off I am jumping from the power on the relay(red wire to the small terminal on the highest point or the relay(blue I think) now if I unplug the pink wire on the IP it does not jump and if the key is on it will blow the 20amp ignition fuse.

Re: RE: Re: RE: M1008 Glow Plug Issue I came up with part numbers of 98226 & the GM number 14076885 but they dont exist. I tried to get an isolated solonoid from NAPA but all of them have only 1 small terminal and when we looked through the picture book all of the 4 terminal units were...

Re: RE: M1008 Glow Plug Issue I thought it was standard relay until I checked the part numbers from the 20P and 34P manuals and the number does not cross to anything and it is not available. Does anyone have the number they can give me so I can solve this. Is there just one relay for the...

OK A few weeks ago my wait light went on at cold start but no relay click and no preheat so I jumpered the relay under the hood and it has been fine ever since then until tuesday when I did some 4wheeling in deep water and ever since then the glow plugs do not operate. I have a wait light but...