Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Concerning the rewire, you wire it just like house wiring, when adding the 3rd wire (think that would be ground to service),
Just Make sure there are no grounds and commons that cross paths (connected together). Your breaker panel scenario may be ok, but check it out.
I don't think your supposed to use a ground rod when running off of a grounded service (correct me if I'm wrong), there has been some discussion on this. Grounding a generator setup is what the ground rod was for.
I see the two wire power cord setup as an issue, when plugging into a standard 30a power source such as in a rv site, you need a ground to the source which the original setup doesn't provide.
I was refering to the power inlet plug (with screw on cap) on the front of the trailer, on mine there was a two prong plastic plug inside of said housing, i had the same thought of converting the innards to something standard but didn't come up with anything.
I had the plywood off the front...