Search results

GMC ?? I traded for the 10.00 tires and wheels but did not know exactly what they came off of. It could be a GMC. They will fit the Rockwell axles on the Ford 600 boomtruck. And do have a military stamping. You can see, 10.00's are a tight fit on a 105... but have a bit higher speed rating.

Okay, here are the rims I mentioned that fit a deuce. I'm not sure where to measure the offset from. I measured 1 1/4" on the ones on the trailer from the face of the rim to the tire bead and 2 1/2" on the one on the ground.

I don't know what they are from but there is a military stamp on them and they fit the 2 1/2 ton boomtruck and M105. They have a farm tire on them, not normal for military that I have seen. I'll see if I can get a photo tomorrow.

I'll see if I can get a couple of photo's. My 73 f600 4x4 boomtruck needed tires and has 6 of the 9.00/20 budd wheels and tires with NDCC tires. I sold a truck and traded for (6) 10.00/20 in reasonable and not weather checked condition, thinking I would use them on the boom truck. Then I...

Yea, that was what I was wondering about, av8or. But that does not mean that they would not go on the narrower axles, especially if Jeff is right and there is a spacer combination that would work. We don't need the width of an original bridge truck. A moving permit could be a pain, but...

Are the inner and outer wheels the same offset...the same wheel? I have some deuce wheels that have different offsets so thought the inner might be less offset than outer. Hope someone has a picture or two. I have 7 old new NDCC 14.00 and was going to single an 817 but now wondering about...

Of course the bridge truck, having dual 14.00's is 10' wide, but can the wheels off an 812 be put on another 800 or 900 series five ton in their dual configuration? Is the inside wheel less of a dish and the outside a very large offset or is there more space from the hub face to the springs or...