Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
This morning I was planing on checking the current on that breaker first and see how much current is tripping the circuit. If DC breaker working correctly I wanted to start isolating the draw from the genset control panel. Hoping it will be easier to separate the DC coil circuit that goes main...
Got a few minutes tonight to work on the unit.
First I started it to make sure it didn't heal, no luck and tripped the breaker.
2nd. I disconnected from the building and started her up, still tripped the breaker when I tried closing the main.
3rd. Took a chance because I was running out of...
Thanks for the helps folks. This evening I went back and let the gen set run for awhile hoping it healed no such luck. Due to the late hour and temps I didn't do any testing. Tomorrow evening I hope to disconnect from the building first and operate the unit. The ground was still solid in the...
Hi Folks,
My mep-004 w/ask is tripping the 7.5 amp dc breaker after I close the a/c breaker to my building. Takes a few seconds then the breaker pops and the unit stops running. Restarts after resetting.
Can anyone think of a common problem these machines have?
After about 50 hours of use on...