Search results

OK Report. Got tired of tapping and flipping.. Unscrewed the connector. As I unscrewed it I heard the valves under the bed activate.....I stopped because I thought the power had been turned off......got into the cab and the gauges were activated, flipped starter and the started right up...

This box is so outdated.......hard to believe they couldn't have used a PC board and 2 plug in relays....

banged on top solenoid and no go..jumped it and engine cranks...checking neutral safety wires now....

the switch and rap will take place when the wife gets home......thanks

Only one speed......when switch is on. I opened the box to measure voltage.....24 volts is present on both sides of the lower solenoid when switch is on....the upper has only voltage on one side....thought about jumping over on it to see what happens. Am I correct that the upper one puts power...

down side to bridge the solenoid? The top one.......I assume the starter switch actuates the starter?

batteries good.....grounds good..trans in neutral ..opened box.......lower solenoid actuating...no gauge fluctuation......go to switch to second switch.....nothing..no reaction from solenoid on top. Plug into box good, grounds good. headlights work......when switched on. what about jumping...

will do.....thanks......took parts off today, cleaned and lubricated, reassembled and topped off fluids......I was low in that regard.....worked like a champ...now......no start....wow. Jon

worked her over today.....top off fluids, some air system work. Started and got to operating temp.....all good.....shut her off this afternoon...went to start it this eve and nothing...power relay clicks....nothing with starter switch. Check batteries, grounds at brain box, all good. starter...