• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. gimpyrobb

    M35A2 will not maintain air pressure

    The vent line should be on the pass side frame rail and the "T" should be near a crossmember. Just pull the brake vent off and extend it up to the air filter area. Make sure you plug the hole left in the original vent tube, and that should be it.
  2. gimpyrobb

    M35A2 will not maintain air pressure

    You will be best to deadline the truck till its fixed right. If you plug the line, you will soon realize that you cannot stop the truck. Don't waste anymore time with this, you have other things to worry about. THIS TRUCK WILL ONLY CAUSE PROBLEMS IF USED THIS WEEKEND. Might even put first...
  3. gimpyrobb

    M35A2 will not maintain air pressure

    Thats the MWO, it sounds like his truck doesn't have it.
  4. gimpyrobb

    M35A2 will not maintain air pressure

    In the older trucks, the fuel and airpack was connected to the same vent- that vent went to the slobber tube like you describe. The fuel vapors screws with the airpack seals, so there is a WMO to separate the vents. Rebuild your airpack and split the vents.
  5. gimpyrobb

    M35A2 will not maintain air pressure

    Time to rebuild the air pack. After that, remove the exhaust port from the fuel line breather.
108,782members
163,962threads
2,306,913posts
978online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks