Search results

My Father said the same exact thing. It doesn't translate well, here in germany. Whenever I say it, people look at me like I have a third eye in the middle of my forehead. Still make good sense to me!!

The bird is thawing for Saturdays festivities. Better to be a few days late, then not at all.

I also measure from the wire to ground. Never know, could be worn through someplace. Or, could the tires to the meter have contact with another source of voltage, perhaps from another wire in the harnes? Well, have a happy and pleasant Thanksgiving Day to you and everyone who reads this Forum...

Both T1 and T2, get their input from the A2. Both T1 and T2 directly feed the A3. The only way that's possible, is to insure that they are the same phase, or they would make a short. Or am I wrong? Would going through the transformers keep that from happening? I am not a Double E. Are any of our...

You have changed out both the transducer and the meter. and also put them in another set and they worked correctly. You have applied line voltage to the A3 and it still dosnt work. About the only thing I would try now, is to take two wires and run the from the output side of A3 to the meter. If...

I took this out of the MEP-006A book. Same, same. 3-9. Frequency Meter and Transducer Test.To test the frequency meter and transducer of the controlcubicle, proceed as follows: CAUTIONThe frequency meter and transducer are amatched set and must be tested as a set. a—. Connect a variable...

If you think the ground is a problem, disconnect the meter ground wire and use an ohm meter from the wire end, to panel ground.

This is the first time I have seen this thread. Is is this a new set to you? Have you ever seen it run right? If you have never seen it run right, the troubleshooting chain is longer. First off, if it's new to you, LOOK at both the transducer and meter, and make sure they are 60 hertz. The...