• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. C

    Need some advice on a hard starting CUCV

    Re: RE: Need some advice on a hard starting CUCV that goofy guy, is gimpyrobb. I got the impact off of ebay, they are on there every once in a while. They are called RoboImpacts. Be prepared to spend ~$150 for a working one. Parts are still readily available for them. the brushes are the most...
  2. C

    Need some advice on a hard starting CUCV

    isaiah you have a bad glow plug temp sensor, its stuck in the open position (the truck always thinks the engine is warm enough not to need the plugs.) I always get confused if its the temp sender on the front of the drivers head or in the rear. I'm sure mike will chime in with the correct...
  3. C

    Need some advice on a hard starting CUCV

    sounds like the controller card is bad. you can hook up a manual switch very easy. pull the light blue wire off of the small terminal on the gp relay under the hood. run a wire from it to a heavy duty momentary on switch and ground the other side of the switch. also once the temps drop below...
108,782members
163,964threads
2,306,932posts
859online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks