Search results

Thhhhaaaaaat is where i went wrong. I had both the transformer backwards AND the resistors soldered to the wrong parts. Whoops. This is why I break stuff for a living! Works great now! Back to the first question: what could be causing the mics to fade in and out?

So picked up a 500:8 ohm transformer and pair of 10k resistors. Soldered the 3.5 left and right channel wires to one 10k, the ground to the other 10k. Soldered both resistors to a leg each on the secondary side of the transformer. Soldered wires to primary side and attached to audio in on...

Yes, the Vic-4 was used in spotting vehicles. Can use 4 radios instead of 2 like the VIC-1. http://www.steelsoldiers.com/showthread.php?14284-VIC-4-intercom-manual-and-VIC-1-VIC-4-mods I will correct my mistake then. Only have a transformer with no resistors. I thought I had missed something.

Hey all! Having a few problems with my LMTV's VIC-4 intercom. The mic cuts out randomly. Youll be talking, then it will start fading out and be gone. Turn off the intercom at the headset, wait a good 10 seconds, works again, but fades after a while. This happens with all of my headsets and...