• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. Retiredwarhorses

    Transmission shifting issue m1165a 2012 hmmwv

    Could be that or a broken halfshaft or diff....have you attempted to move it in HL ? This is the setting to Use when you have a broken halfshaft.
  2. Retiredwarhorses

    Transmission shifting issue m1165a 2012 hmmwv

    Once again, any Good trans shop can test the trans while in truck. If the trans was just rebuilt, call the rebuilder. even if the TPS or TOSS were bad, the trans would be in limp mode, would not affect what you are stating. when you say you have to push the pedal to the floor, I'm assuming you...
  3. Retiredwarhorses

    Transmission shifting issue m1165a 2012 hmmwv

    It's should be throwing codes if the pressures are out of whack...you will have to check codes via the diag port on the TCM, that will require the cable, if you don't have a cable, you need to tap into the TCM, a good trans guy should have a scanX 2000 to simulate The TCM.
108,967members
164,077threads
2,308,595posts
857online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks