Search results

Probably a good idea especially if the age of the hose is unknown. I have successfully done this without removing the intake myself. However, if this was the source of your issue the check valve would not have worked. The root cause of your issue has to be between the check valve and the...

Agreed. If I understand the location where you put the check valve in, there is only the solid fuel line bridging across the truck to the drivers side, rubber fuel line to the sending unit, and then the sending unit "behind" that check valve. Did you check back there to see if there is any...

This! The pressure sensor is only one (the most common) point of failure on these filter bases. There are a couple of other parts that rely on small o-rings to seal. If they are not sealing perfectly you could still lose prime. Sounds like your situation improved when you blocked off the...

:funny: Those videos AND shoes made the wait to read this thread well worth it! So, before I had figured out that the spin on conversion was ideal, I had the same filter base issue on both my trucks. Somewhere in the old posts is a source for the updated pressure sensor. I purchased these...