Search results

Hey Rusty. You are right about modern truck frames. Most of the ones I have seen have warning decals on them saying not to weld or even drill new holes in them.

Hello Wilfred. What you are seeing is one of the many mods done to our trucks. That is the muffler. The exhaust ran from both cylinder banks, joined up at the rear left side of the engine through a "y" adapter, dropped down below the cab floor boards with a flex pipe, followed by a relatively...

When our trucks were built by Bombardier back around 1982, they used an American M35 as the basis and then proceeded to make upwards of 40-50 improvements. I am guessing that additional tie down point at the front of the frame was one of them.

On our trucks, those bolts and holes are there, its a tie down point on the frame. There are 3 of these tie down points on the first 6 feet of frame on each side. In actuality there were 2 mods done, the frame extension and installation of step plates between the bumpers and the front of each...

Hi Guys. Up here North of the border, all of our M35`s or as known here, MLVW`s were modified in the mid `80`s with front bumper frame extensions. Didn't`t matter if they were winch equipped or not, all were done. This mod was greatly appreciated by all because we now had a platform for drivers...