Search results

I cleaned s8 and everything else I could get to. The percent load meter started working and I ran 3 ac's and the microwave. Only showed about 40 percent load or a little higher. About right because clamp on meter showed 29 amps on one leg and 18 on the other. Then i ran a 3 phase ac on it...

I knew that. But nothing can be taken for granted. Been trying to read as much as i can about these things. I got one but need on more to fully run my house. The nice part about these is all the info available. I work on 18 wheelers and have a lot of manuals but nowhere in them will you find any...

Now that makes sense. I was thinking s8 was the switch you turn to change which phase the voltmeter reads. Didn't understand why that switch would affect the load. I've had top cover off twice. Guess it will come off again.

I ran it today with just 2 AC's. ran good for about an hour. So I went in and started vacuuming and about 10 minutes of that and it tripped off. I know it is carrying less load than the onboard 8 kw will so definitely a problem. I opened the panel and the S8 is the rotary style-about 4" long...

Rv is not bonded. So I kept the gen bonded and ran it. With 3 AC's (15,000 btu) and electric water heater on it ran about 15 minutes then trip on overload. Load meter wasn't working and I forgot my clamp on at work but that is usually all that the on board 8 kw can stand. Have even tripped some...

Thanks. That makes it easy!!!

I got the new to me 803 a couple weeks ago and finally got it ready to load test on the motor home. It is sitting temporarily on a little trailer so I know I need to drive a grounding rod in but not sure on the bonding strap. I assume that the motor home is not bonded because the system that you...