Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
I found my existing gauge has a connection problem inside on the ground. Cleaned all the connections and that didn't fix it but can twist the post the ground wires are on and it will start working.
You tell me?
It has a decal that reads RESET but no plate or indication that included a new engine or anything that drastic.
It had documentation that says the fuel and temperature gauges, among other things, were replaced at 2616 hrs.
The fuel and temperature gauges look newer than...
Looks like the gauge is bad. Base nuts on connections were a little loose but that didn't fix it. Cold resistance on sensor wire was 440 ohms. Running voltage to power connection with negative lead connected to gauge ground is 26 volts. Engine warmed up and reading 180 at thermostat housing via...
My fuel gauge quit a while back. It started back working while testing. Today I was showing my wife how to start the generator and manage loads during one of the 4 outages we had. She didn't hold it in start long enough and it shut down. When she restarted it the fuel gauge was dancing back and...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!