Search results

Im stuck trying to get the pan down. I removed the drive shaft that was in the way but not the yoke on the transfer case. Do you have to remove that too? Sent from my iPhone using Tapatalk Pro

Just downloaded the entire service manual for the transmission and will be going pin by pin on the transmission connector. Trying everything possible to make sure that it is a solenoid or something internal before taking all the steps to drop the transmission pan. That drive shaft does not look...

I checked that harness back and forth and i could not find anything wrong with it. If you have something else to check on the harness or a better pin out guide I'm all ears. Sent from my iPhone using Tapatalk Pro

Thank you for the pictures. Did you have to remove the driveshaft to get to the solenoid? Also which harness pin was faulty on your truck? Sent from my iPhone using Tapatalk Pro

I have removed the transmission controller since it was burnt up. I have not reinstalled the new one due to fear of it burning up. I then tested the harness for continuity and all looked good from it. Next I went wire by wire testing the ohm ratings from the harness to each solenoid and the E...

After doing all of the steps to diagnose my transmission issue we have determined that it is a transmission solenoid. So I will be removing the bottom portion of the transmission. Do anyone have any experience with replacing a solenoid and where to buy them new? Sent from my iPhone using...