Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ok, it all adds up now. Thanks. Since my house and system is small, my single 8kw heat strip appears to be sharing the same circuit as the handler. The install manual says there should be an internal breaker for the strips inside the handler but using that is not feasible. My load manager...
So, I turned off the 60A breaker and I think it killed power to the air handler too (I think). The thermostat immediately gave a power loss error and I couldn't engage regular heat (or do anything). For me, the heat strips are colocated inside of the air handler. Are you saying that typically...
I learned something new about heat pumps today that *might* be relevant to sizing the load for a generator to some people in certain climates. Someone more knowledgeable about HVACs might be able to correct me but I think this is mostly correct.
I didn't realize that in very cold weather the...
Thanks. My panel isn't labeled all that well and I wasn't exactly sure. I do have a 40 amp circuit as you described. My heat strips are only 8,000 watts. Isn't that only 33 amps even though the breaker is much larger?
I was figuring I could run the strips and maybe the fridge with...
I've been searching the archives for awhile. Is there a 803A inspection checklist? I mean something lightweight for inspecting a unit you're considering to purchase.
I am reading through the TM more closely. I can use some logic to come up with things to check for each major system. I...
I've been looking at them and Aurora. I think I would be into a well over $10,000 investment with either. I guess it really depends on what a MEP -803A in good shape will go for. I am hoping I would do a lot less than that. I think I can get a Kubota 11kW for $6K, albeit 3600 RPM, but it's a...
You guys are right in that spot where you always have the edge on us. It's just as stupid hot here in July but I think you guys have a slightly nicer winter.
Yeah, don't want to have a wet stacking issue but don't want to be overloading. I don't know the voltage drop when that 117 LRA is...
Thanks for all of the above responses. Very good info. I would rather spend more money upfront so I can hopefully ease into fixing problems rather than starting with a unit that won't power on. I haven't figured out where those reputable sources are just yet. That brings me directly to...
I am probably missing something obvious but why would a generator with so few hours even be up for auction? Aren't they sold only after being used extensively?
Thanks. From reading the archives, it seems a lot of engine hours isn't a concern to most folks.
I was surprised to see so many low hour units on the gov auction site.
Edit - that unit is already sold. Maybe it was a good price.
Hello,
I've been able to look at past auctions and closed eBay sales to understand the range of prices for a 803A. However, this doesn't tell me the true condition vs. the kind of work that was ultimately needed.
What does a 803A cost these days if we're talking about one in really good...