Search results

You are missing two safety covers for K1. Not a show stopper, but I would fab up some plastic to at least keep things from falling down on the K1 and shorting it out. The safety covers had partitions between the load wires, but you really need to feel inventive to create something like that...

[/COLOR] No. the meter should read AC volts. Look at the schematic. The M1 takes its reading directly from the S6. The S6 gets its voltages from the S8. The S8, (S6 also) is nothing but, from front to rear, side to side, AC voltage. The one wire goes to phase, terminal 32. The other, depending...

First try some contact cleaner on S6. And work the switch back and forth at the same time, about a million and a half times. Lets see what that brings.

What Position is your S8 and S6 in? Have you measured at the load terminals for AC voltage? Have you measured at the meter terminals for AC voltage?

So where are the pictures?

It's a very common mod. I installed hundreds to gen set here in Germany. Simple to use, easy to install and it works like a charm.