Search results

Thanks. I bent it around a 4” in diameter steel round, so a 2” radius. Couldn’t get any shop to respond to my request to bend it so I went with using a little propane forge I have and this jig I made with angle iron, rebar welded on to help keep it from rolling, and a 4” off cut borrowed from a...

So I bought 30’ of flat bar and have maybe 5’ left as I built it. The uprights were about 22” each. I used 1.5’ of 3” tube for the brackets. I bought but didn’t use expanded plate for screen. I decided not to add it. Here’s some final pics. i might decide to redo the brackets slightly thicker...

I can take some measurements in the final height. It depends on the bumper you have. I did some customizing as well to get it the way I wanted. I used 3/8 thick bar as described here and the uprights I used 2” square 3/16 thickness. The brackets were 3” square tube I cut a side off of. I ordered...

A short movie of the bending step

So I started building my own brush guard off dimensions shown on this thread. I did the bends with a propane forge and a easy jig I made with angle iron and a 4” round piece of steel. I just have it tack welded for now. The mount I made from 3” tube cutting it open into a bracket. I’ll post...