Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Mine would remain dry when running, but overnight the bottom would be wet, and then I would have bubbles when starting. It would stay dry all day, so long it was started within 4 hours of running. If I let it sit all day when at work (8 hours) it would have some bubbles, and the base would be...
I just replaced a box housing with the later 6.5 round filter housing (plugs are the same) I also suspected a bad housing, and rather then search for the right o-rings I just swapped housings. Glad I did, because initial inspection showed a slight cracking near the bottom of the housing...
425psi is a good pressure, very good is close to 475, poor is 375 or lower. On the good 6.2 I do I see 475 alot, 6.5 I can see 500 sometimes. The next step up in gauge is probably going to be a 1000psi gauge.
FYI glow plug thread is an M10-1.0.
Sent from my SM-S920L using Tapatalk