Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Hello again.
I solved the problem switching the lower spacer to the upper screws, plus adding other spacers. Now it's straight and the lock goes in a little bit more, about 3mm... Lower locker need also to be adjusted because cab was not entering correctly!
Thanks a lot for helping me!
Christian
Hello Ronmar!
Thank you for your reply. Yes, there are spacers between the upper hookplate. Now I need to figure out if it's better dismiss the lower spacers or add some upper spacers too!
Many thanks, it helped me a lot!
Christian
Hello Suprman.
Thank you for your reply. I will try to dismiss the spacers under the 2 lower screws, also for me seems misaligned...
Have someone a picture of a correct aligned bracket?
Thanks a lot!
Christian
Hello forum.
Finally I got my M1078 from the dealer and starting the RV conversion. But for first I have a problem with the cab latch. The hydraulic latch is working well (tried it with cab fully raised, it engages and locks the hook), but when I lower the cab the pin would not go in and block...