Search results

Thats her in an earlier poset to guyfang i said cs7400 but the sticker was wrinkled Ya i have a C57400 with one jumper. Thanks guys i got that manual downloaded you sent me too. When i get back to hq from sight seeing ill giver a go Thanks again bud

From that feed i have version 2 blue square plastic. How the **** is it working woth only one jumper then?

Ive got 3 herniated disks in my therasic area so i know right where your at. Im hoping for a quick recovery brother. Take it easy

Where those numbers i gave you not enouph to identify? No jumpers huh.. there is definatly only one. Ill try to post a pic Update Cant upload pics from my phone even in desktop mode. Jumper is from pin 4 to 8. Update it must be the newest switch cause like i said it all works now. The tech...

The diode is definatly bad as i said in my first post but theres two ways a diode fails, open and closed. Open means it just blows and becomes on open circuit. Which would actually not allow dead crank or pumps to work. This is the ideal way they fail cause then u know its bad right away. Mine...

No its never worked since he got it from auction. Turn key everything fired up but no crank from S1. It must be the 3rd model of S1 cause only one jumper and it has continuity at all 4 inlet pins that should be jumpered in the schematic 2,4 6,8. Also 24v at those points. Switch sticker CS7400...

Ya i double checked all that side of S1 had power cause they are all jumpered together with either external or internal connections. But on the output side of the switch i only have power at 3 in run mode. Everything else you listed was correct too on switch positions. Problem was pin B on k19...

Im at my buddies off grid in hawaii for a few days and am trying to help him get his genny up. The dead crank works. I get both main and aux fuel pumps when in run with aux. looks good there but when i try to crank no crank. I have started it by putting the dead crank in normal posotion, Turning...