Search results

It's just a normal cummins pt pump I have a takeoff unit that goes on a small cam that came off my personal NHC250. It is around 40 percent more power over a stock pump. You have to add a dual fuel line kit and a little more air for it to not burn the motor up

More than likely its the throttle shaft... You can repair it on your own but it isn't much fun. You have to remove the pump and disassemble the unit. Member Technoweenie did it awhile back. Maybe he could help you. A pump shop may charge you $350 to $600 for a pump rebuild... The truck just...

Fording plug. You only install when entering high water. leave it out to prevent buildup of crap inside of it like clutch material or oil. Injection pump seems to weep off that lift pump or the throttle shaft mostly. Common thing. Have it rebuilt if it is sucking air.

Vents are located on the drivers side of the axle housing on the rear and the passengers side in the front. Use a 7/16" wrench or socket and remove them and install an 1/8" npt hose barb. and add a hose to route up higher.